Highlight:
Wire Peeling & Stripping Blades Wire Stripper 0.7-1.2mm for automatic Winding Machine
Wire Stripper :
Wire Peeling & Stripping Blades (Precision Insulation Removal)
Before soldering, the enamel insulation must be removed cleanly.
NHE Peeling Blades are the perfect partner for your automatic stripping machines.
Material Options:
Tungsten Steel: Best for high-volume production and abrasive insulation wires.
High-Speed Steel (HSS): A cost-effective solution for standard wires.
Precision Grinding: The cutting edge is ground to a specific angle to peel the coating without reducing the wire diameter
(which would increase resistance and cause failure).
Configurations: We supply Flat Blades, Cone Blades, and Three-Claw Blades to fit various stripping mechanisms.
The Principle of the Wire Stripper
It works at low voltage (long durability ,electrically harmless ) and is connected to the CNC Automatic
Coil Winding Machine or other machine which can offer 5000rpm/min.Three pieces of hardened
diamond material blades of the stripper from a funnel ,these will close the wire from the largest to the
smallest diameter,
as the rotary speed increases the magnet wire is feed between the
blades to the required depth ,the start button is pushed and the
stripper slowly drawn away from the wire .
Specification:
| Model |
Wire Diameter(mm) |
Installation Size |
Outer Dimension |
| PPKSS |
0.15-0.7 |
Ф7*13.0 |
Ф31(max)*65 |
| PPKS |
0.7-1.2 |
Ф7*13.0 |
Ф31(max)*65 |
| PPKM |
1.2-1.8 |
Ф7*13.0 |
Ф31(max)*65 |
| PPKL |
1.8-2.8 |
Ф7*13.0 |
Ф31(max)*65 |
Picture Show :
Q1: Can you customize peeling blades for special wire shapes?
A: Yes. If you are stripping flat wire or rectangular wire, please send us the wire drawing and insulation specs.
We can grind custom blade profiles to ensure clean stripping without conductor damage.
Your message must be between 20-3,000 characters!
