Payment & Shipping Terms:
|Package Size:||210mmX150mmX160mm||PProduct Weight:||0.50 Kg|
|Tension Range:||50-900g||Wire Speeding:||10m/s|
|Stable Tension:||±1%||Mouting Hole:||Φ16mm|
|Price:||Factory Direct||Type:||Vertical Type|
|Applicable:||All Kinds Of Winding Machine|
Pm Stepping Motors Magnetic Tensioner,
10m/s magnetic tensioner,
16mm magnetic tensioner
Coil Winding Tension Tension Controller
Tensioner is a necessary factor for keeping consistent winding accuracy.
Selecting better tensioner provides a sophisticated winding machine with best performance. Stabilized tensioner improves winding problems and enhances productivity. For example, stabilized tensioner causes no breaking of wire, raises operation rate, secures the value of resistance, and increases credibility of the product.Perfect layer winding leads to material cost cutting and easy adjustment. Therefore, time and cost for machine maintenance can be decreased.
QIANHE Engineering has a wide range of tensioner types, from basic Magnetic type tensioners to servo motor tensioners.
I , Products Features
Our Magnetic Tensioner QH-MTC series with a wide range of tension, wide diameter, versatility, and other characteristics.
1, Vertical magnetic tensioner is generated by the permanent magnet , no mechanical friction, so can produce stable tension for a long time, and accuracy can get effective guarantee.
2, The freedom of the adjustment of the tension and back -tension, can be adapted to the side of the skeleton of the winding and sharp changes in the speed of the winding around the wire, will not produce a broken wire.
3, MTC Series Tensioner latest improvements:in the damping wheel and the guide wheel designed to install anti-jumper device
4, This Tensioner can choose a variety of the tension bar to meet the needs of different winding; can also custom-made according to the user's requirements , The default is the company's standard;
5, The drive wheel and guide wheel using fine polishing special ceramics, effectively avoid the wire winding mechanism damage the wire.
Guide wheelwith high-speed bearing original imported from Japan
6, Damping wheel with special rubber ring, wear-resisting and to prevent the wire damage
7, When the broken wire and the wire rod are used up, the detection device is informed by the disconnection detection device of the equipment, and the winding machine automatically stops(This section is optional)
Use matters needing attention:
1) If long tiem without using ,when the damping wheel jitter ,before starting please turning to degaussing process,first clockwise and then counterclockwise to adjust the maximum immediately to complete the degaussing
2) Adjust the tension knob (clockwise rotation tension increases, otherwise tension reduction), when working need use tension meter to measure the exact tension of the enameled wire,according to the need to adjust the tension adjustment knob, and note the corresponding knob scale value,easy to debug other product;
3) Adjust the anti-tensionadjustment knob, the knob is used to control the tension bar at work when the correct location, that is, the shell on the two red mark between the lines, while note down the corresponding anti-tension scale value of the cursor to facilitate debugging other products;
4) in the work process allows only by minor tension, prohibited by a small flat. When the tension required by the major hours must be adjusted in a stop state, so as to avoid breakage .
|Products Series||Model||Tension Scope||Applied wire diameter||Tension Rod|
|MTC Series (vertical type)||QH19-MTCSS||4-100||0.025-0.12||CX-1#|
Tensioner test conditions :
Line speed is 10M/S, instant start, stop the continuous line, stable tension in the positive
and negative ±1%g.
Why do you choose us?
In hardware tools, the wire winding machine training industry has more than 10 years of
experience, we have more than and 100 skilled workers.
2. competitive price
One-stop service, from the material of die cutting process, production, QC, packaging,
delivery. We are sure we produce all the goods. And the quality is 100% rest assured. Many
customers are very happy to cooperate with us, because we can provide a more competitive
price as a factory.
3,The best choice of material
All of our goods are the best material from the best suppliers, whether the material is qualified
can be checked.
4. Quality Control
Before shipment, there are specialized personnel checks, each product in the packaging before
the inspection is qualified. We guarantee that each product shipment is perfect for sale.
5. Good service
We promise to answer your question in 24 hours.
Contact Person: Csilla Wang