|
Product Details:
Payment & Shipping Terms:
|
| Material: | Tungsten Carbide | Hardness: | Reached Over HRC90 Degree |
|---|---|---|---|
| Anti Bending degree: | Over 2300N/mm | Polish: | Precision Grinding |
| Roughness Of R Place: | Ra0.025 | Application: | CNC Automatic Winding Machine |
| Model NO: | CW0404-2010-3510 | Package: | 20pcs/box |
| Production Capacity: | 50, 000pcs/Month | HS Code: | 8479899960 |
| High Light: | industrial nozzle,tungsten carbide tubing |
||
Coil Winding Nozzles / Wire Guide Tubes With Precision Grinding
Coil winding wire guide Nozzles(TungstenCarbide nozzle)also call wire guide tubes,
wire guide eyelets, wire guide needles, it is used on coil winding machine. It is made
precisely of hard alloy and enjoys the hardness up to HRA90. Two terminals andinnerle
are all receive mirror surface treatment to ensure enameled wire makes no scrape.
High hardness, resistance to flexure, block and impact.
Key advantages of Tungsten Carbide Nozzle :
1. High Wear Resistance
This is assured by the choice of materials for wear elements possessing. Hardness
Value: 1800 ~ 2200Vickers, or 3times that of case hardened steel. Body material is stainless
steel for structural supports, not wear-bearing.
2. Scratch-Proofing
Eliminate wire insulation film damage, low friction resistance, stable wire tension.
The wireguiding surfaces are mirror finished by diamond lapping to a surface roughness of
2 4 micro inches Ra or better, material permit.
3. Straightness and Stiffness
Straightness and Stiffness are defined by the wire exit being concentric and inflexible
with respect to the nozzle locating. In plain terms, the wire should exit from the nozzle
concentric to the locating, To within 0.02 mm, with or without load. A geometric
Characteristic presentation is shown at upper left. Concentricity to within 0.01mm.
4. Precise Exit Radii
Because the coil winding nozzle's Exit Radii governs the angle of the wire exit from one
coil to the next, it should be monitored to + / - 0.025 mm. This is done by digital measurement,
shown at upper right.
Specification and description:
| Part.No. | Model | Specifications(mm) | |||||
| L | L1 | D | D1 | d1 | d2 | ||
| 1 | W0202-2005-1505 | 15 | 5 | 2.0 | 0.5 | 0.2 | 0.2 |
| 2 | W0202-2000-3300 | 33 | * | 2.0 | * | 0.2 | 0.2 |
| 3 | W0202-3010-3015 | 30 | 15 | 3.0 | 1.0 | 0.2 | 0.2 |
| 4 | W0202-3006-3010 | 30 | 10 | 3.0 | 0.6 | 0.2 | 0.2 |
| 5 | W0202-3015-3015 | 30 | 15 | 3.0 | 1.5 | 0.2 | 0.2 |
| 6 | W0202-3007-3508 | 35 | 8 | 3.0 | 0.7 | 0.2 | 0.2 |
| 7 | W0303-3008-3012P | 30 | 12 | 3.0 | 0.8 | 0.3 | 0.3 |
| 8 | W0303-3012-3519 | 35 | 19 | 3.0 | 1.2 | 0.3 | 0.3 |
| 9 | W0303-3008-4506 | 46 | 6 | 3.0 | 0.8 | 0.3 | 0.3 |
| 10 | W0303-3020-3515 | 35 | 15 | 3.0 | 2.0 | 0.3 | 0.3 |
| 11 | W0303-0800-3500 | 35 | * | 0.8 | * | 0.3 | 0.3 |
| 12 | W0303-3018-4018 | 40 | 18 | 3.0 | 1.8 | 0.3 | 0.3 |
| 13 | W0404-3010-3009 | 30 | 9 | 3.0 | 1.0 | 0.4 | 0.4 |
| 14 | W0404-3007-4528 | 45 | 28 | 3.0 | 0.7 | 0.4 | 0.4 |
| 15 | W0505-3012-4506T | 45 | 6 | 3.0 | 1.2 | 0.5 | 0.5 |
| 16 | W0606-3012-3520 | 35 | 20 | 3.0 | 1.2 | 0.6 | 0.6 |
| 17 | W0606-3016-4010T | 40 | 10 | 3.0 | 1.6 | 0.6 | 0.6 |
| 18 | W0808-3018-3518 | 35 | 18 | 3.0 | 1.8 | 0.8 | 0.8 |
| 19 | W0808-3018-3010 | 30 | 10 | 3.0 | 1.8 | 0.8 | 0.8 |
| 20 | W1212-3022-3010 | 30 | 10 | 3.0 | 2.2 | 1.2 | 1.2 |
Above is just for example all size can be customized according to customer’s special dimensins drawing requirements .
The the measurements drawing as follow please confirm your nozzles size according
to your winding machine and coil products.
Nozzle inner bore with grinding effect:
Picture show :
Contact Person: Csilla Wang
Tel: +8618958064130
